Technology

How to Reset the Filter Indicator Light on Your American Style Double Door Refrigerator

One of the most important things when it comes to an American-style side-by-side refrigerator is to change the water filter cartridge regularly. After changing your refrigerator’s water filter, you should reset the filter indicator light on your refrigerator’s display to monitor when it’s time to change your refrigerator’s filter again.

Unfortunately, you have probably already lost your manual. Don’t worry, keep reading.

Each side-by-side refrigerator manufacturer provides its own instructions for resetting the indicator light. So here is the list from 30+ refrigerator manufacturers on how to reset the light after replacing refrigerator water filters:

Amana: press and hold the lock and auto light (or water) buttons on the dispenser (at the same time) for 4 seconds until the filter status indicator begins to flash, then release the buttons.

LG / Atag / Fagor / Liebherr: press and hold the Light / Filter button for 3 seconds.

Bauknecht: press and hold the filter reset button for 3 seconds until the light turns green.

Baumatic: press the ice maker lock button for 3 seconds or more. Then the LED will change to NORMAL.

Beko / Teka: press and hold the Auto Eco button for 5 seconds.

Bosch / Siemens / Neff / Balay / Miele: press and hold the water filter reset button for 5 seconds. Newer models: Press the Options button until “filter change” is selected, press the +/- selection buttons until the “filter change” screen turns off.

Caple: press the Reset button until the light turns green.

Daewoo / Nardi / Pelgrim / Steel: press the ice maker lock button for 3 seconds or more; while holding down the lock button, the light will turn green.

From Dietrich: press and hold the Reset Filter button for 5 seconds.

Gaggenau: press and hold the filter reset button for 3 seconds until the yellow / red light turns off.

GE: press and hold the Reset Water Filter button on the dispenser for 3 seconds.

Haier: press the Reset button.

Kitchen assistant: press and hold the filter reset button for 3 seconds until the order or replace light turns off.

Maytag: Press Options, then Water Filter, then Reset, and then Yes. The status light will change from red to green when the system restarts. Or press and hold the filter reset button for 3 seconds.

Samsung: press the Ice Type and Child Lock (or Humidity Control) buttons simultaneously for 3 seconds. Note: Press and hold the buttons for only 3 seconds. If you press these 2 buttons simultaneously for 5 seconds, the reset function ceases. Release the buttons and repeat the same step one more time. The water filter indicator light should turn green.

Smeg: press and hold the OK button until all three dashes reappear on the screen. Or press and hold the Reset Water Filter button for 5 seconds.

Below zero: press and hold the filter reset control for 5 seconds.

Whirlpool / Hotpoint- Ariston / Kppersbusch: press the Reset Filter button until the icon turns blue (or green). The Reset Filter button will not work if the filter icon is already blue (or green). Now, press the light switch 5 times in 10 seconds.

Leave a Reply

Your email address will not be published. Required fields are marked *