Step-by-Step Installation Guide for Scanner Knight Rider LED Lights

Are you wondering about installing a new Knight Rider LED Scanner Light Kit on your car and light up your boring vehicle? If the answer is yes, then this article might be a pleasant surprise for you. Listed below are simple, easy-to-follow instructions for installing a Knight Rider light kit on your car.

Installing a Knight Rider LED kit does not require a lot of specific professional skills or technical experience. With the simple plug and play installation, such lightings can be installed in a matter of minutes without any significant effort. This kit can be easily installed in your car by following the easy step-by-step instructions. Read below to find out how!

• Remove the kit and open the front cover of your car.
• Position the scanner bar so that the wiring portion of the kit is close to your car’s battery. This is done to ensure that later on the lights can be easily powered by the car battery without facing any kind of wiring problem.
• Take out the zip ties and tie the scanner bar to the vehicle grille with the zip ties. While tying the scanner bar with the grid, please make sure that the wiring end part of the LED scanner bar is not bent, otherwise the whole setup may be damaged. The end of the wiring must be kept straight throughout the process, without fail.
• Once the bar is securely attached, connect the LED scanner with the control module, supplied in the Knight Rider kit.
• Be sure to hide the control module near the vehicle’s battery. This will ensure that the control module always remains dry and intact without being damaged.
• Of the wires provided on the control module, connect only the red and black wires to the positive and negative terminals of the car’s battery. Leave all the remaining cables as they are, without making any connections.
• Once the connections are made, you’re ready to flaunt the upgraded version of your Knight Rider light-equipped car with LED scanner.

By following the instructions above, a Knight Rider LED Scanner Light Kit can be quickly and easily installed on your car. Now, you won’t have to rush to the local mechanic or panic about installing newly purchased scanner lights on your car. Just read these instructions and give your car a whole new look!